Basic Info.
Collector Components
Glass Vacuum Tube
Specification
Tank capacity: 150L/200L/250L/300L/350L
Origin
Zhejiang, China(mainland)
Product Description
Features:
1The collector and the water tank are separated, and the system runs under the
Forced pressure. The water tank can be installed anywhere.
2. No water in the tube so it never crack easily and never fur up.
3. Stand up to freezing below -50degrees.
4. Needs only temperature difference, sunshine is unnecessary, high heat conduction
And will never hibernate.
5. Ultra low temperature molecule vaporizing conduction (vaporizing point of the medium
In the pipe is -38 degrees).
6. Low heat capacity and fast warming-up, heat output power is above 120W, fast conduction can be measured by second and is 1000 times of copper, conduct heat effectively even under non-sunshine weather.
7. Even one of the pipes is cracked, the machine works as well as usual because each pipe works independently.
8. Tri-layer vacuum protect heat from losing, good one-way conduction have effective heat preservation.
9. Heat pipe is free from water flow, which ensures cleaner water.
10. Heat pipe keep earth sediment away, realizes everlasting high heat efficiency.
11. Multifunction: Bathing, washing, domestic heating.
12. Easy installation and it could be installed in the flat place or inclined roof such the balcony veranda, the southern wall sloping roof or awning.
13. The controlling device is specialized, the system runs automatically.
14. All the merits listed above ensure low maintenance cost during the product life.
Specifications:
Solar collector tube: 58mm*1800mm, 58*2100mm; Transmittance of borosilicate glass is 0.92
Tank capacity: 150L/200L/250L/300L/350L
Inner tank: Pressurized food grade SUS304/2B stainless steel with 0.50mm thickness, T applies with the enamel internal bladder, runs under pressure
Outer tank: Zinc and aluminum coated steel sheet or color steel sheet
Copper coil: TU1red copper, diameter 12mm, thickness 0.80mm
Heat preservation: 72-80hours
Hail resistance: 28mm
Pressure resistance: 0.6MPa
Tube standards: Borosilicate glass 3.3 tubes with 58mm diameter and 1.80mm length;
Absorptive rate: More than 96% (AM1.5)
Stagnation temperature: 270-300 degree
Freezing resistance: -50 degree
Heat insulating layer: Improved polyurethane integral foaming with thickness 60mm
Frame: Zinc and aluminum coated steel sheet or color steel sheet
Fasteners: Stainless steel screws
Seal: Imported silicone rubber polymer ringing to connect and seal
Advantages of pressurized solar water heater than non pressurized solar water heater
1. Solve the problem of non-pressure solar water heaters zero pressure hot water output
2. Solve the problem of inconstant water thermoregulation caused by maladjustment of nature fall pressure of non-pressure solar water heater and cold water pressure change of tap water
3. The water capacity in water tank keeps constant in use in order to avoid the empty heating while the heat storage tank falling fetching water
4. Avoid repeat operating complicated water feed problems every day
Pressurized solar water heater principle:
High pressurized solar water heater stand alone model is a new type of solar water heater which adopts advanced copper heat pipe and all glass vacuum tube Technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condenser indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The cooper and winding pipe increase the costs, but bring stronger heat exchange ability. The temperature of water tank and heat exchange area of winding pipe can be adjusted to keep the continued bath requirement.
Address:
No. 2, Panhong Road, Industrial Zone of Yuanhua Town, Haining, Jiaxing, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics, Metallurgy, Mineral & Energy
Company Introduction:
Haining Jiaoyang Solar Energy Water Heater Co., Ltd.Is a comprehensive company with high-level science and technology.We are concentrated on the scientific research, production, marketing and international trade in solar energy and other new energy fields.We have engaged in solar energy for more than 8 years and our main products are non-pressurized solar water heater, integrated pressurized solar water heater, split pressurized solar water heater, Vacuum tubes and other accessories.OEM service is welcomed!
Due to high technology, our company has developed 3.3 high-boron silicon glass tubes, "three-high" vacuum collector tubes and assembly lines of solar energy machines.At present, our enterprise has formed a team with high quality and technology, including engineers, technicians and skilled workers.
We would like to devote our strength to promoting Chinese new energy and environmental protection.